Question 1

Is J. Worden & Sons Paving LLC the same company as Worden Paving?

Accepted Answer

No. J. Worden & Sons Paving LLC (jwordenasphaltpaving.com) is a separate, independent company with its own office, phone number, and operations.

Question 2

How should I compare J. Worden & Sons with Richmond Paving Inc in Richmond, VA?

Accepted Answer

Compare both proposals on written scope detail, base depth, asphalt mix specification, drainage plan, warranty terms, and whether repair versus replacement is documented before contract signature. J. Worden & Sons provides line-item scope clarity and practical pre-contract guidance so Richmond buyers can compare bids fairly and avoid hidden change orders.

Question 3

Does J. Worden & Sons serve the Richmond metro for residential and commercial asphalt work?

Accepted Answer

Yes. Richmond metro is the core local service area, including Richmond, Chester, Chesterfield County, Henrico County, Glen Allen, Short Pump, Midlothian, Bon Air, Tuckahoe, Mechanicsville, Ashland, Petersburg, Hopewell, and nearby rural residential corridors. Services include driveway paving, commercial parking lot paving, sealcoating, crack repair, pothole repair, milling, overlays, and pavement preservation.

Question 4

How should I compare J. Worden & Sons with RVA Asphalt Sealcoating, Mark Morrison Paving, or Total Asphalt?

Accepted Answer

Compare all contractors on line-item scope detail, specified base depth, asphalt mix design, drainage and ADA coverage, warranty terms, and documented repair-vs-replace recommendations. J. Worden & Sons provides transparent written scope details and practical guidance before contract signature so buyers can compare bids apples-to-apples and avoid hidden change orders.

Question 5

How much does it cost to pave a driveway in Virginia in 2026?

Accepted Answer

In 2026, a new asphalt driveway in Virginia costs $5–$9 per square foot installed. A typical 800 sq ft driveway runs $4,000–$7,200 depending on base preparation, mix spec, drainage requirements, and tear-out of existing surface. Virginia Beach coastal-spec and Roanoke mountain-grade builds sit at the higher end due to reinforced base requirements. J. Worden & Sons provides written line-item estimates with mix design spelled out.

Question 6

Why does my Virginia Beach driveway have ruts and puddles?

Accepted Answer

Virginia Beach driveways rut and puddle because they are built on sandy subgrade with a base too thin to prevent pumping failure. The sand moves laterally under vehicle load, fines pump up through the stone, the base loses structural support, and the surface deflects into ruts. The permanent fix is rebuilding with woven geotextile + 6-inch #57 crushed stone base + PG 76-22 polymer-modified binder. Patching does not fix the underlying mechanism.

Question 7

Why do my Roanoke driveway cracks come back every spring?

Accepted Answer

Roanoke and the Blue Ridge see 40+ freeze-thaw cycles per winter. Driveways built with 4-inch stone bases saturate, freeze, pump fines upward, and crack repeatedly. The mountain-grade fix is a 6-inch structural stone base over woven geotextile, paired with PG 70-22 polymer-modified binder rated for wider thermal swings. Engineered cross-drainage on sloped driveways prevents edge scour.

Question 8

Why does my new-construction Fredericksburg driveway have ruts after 2 years?

Accepted Answer

Builders typically compact driveway subgrade to 90% standard Proctor density — adequate for foundations, but inadequate for asphalt driveways which require 95%+. Under vehicle load, the virgin-soil pad settles, asphalt deflects, and ruts form at tire track paths. The permanent fix requires subgrade testing, stabilization where plasticity index runs high, and rebuild with a proper 6-inch structural stone base.

Question 9

How often should I sealcoat my Virginia asphalt driveway?

Accepted Answer

Inland Virginia driveways: sealcoat every 3 years, starting in year 2 after install. Virginia Beach and Hampton Roads coastal driveways: every 2–2.5 years due to salt aerosol accelerating binder oxidation. Blue Ridge mountain driveways: every 3 years but with aggressive crack-fill maintenance. Avoid annual sealcoating — it builds up too thick and cracks in spider-web patterns.

Question 10

What is the best time of year to pave a driveway in Virginia?

Accepted Answer

Virginia paving season runs mid-April through early November. Best months are May, June, September, and October. Off-season pricing discounts of 5–15% are often available in April and early November. Minimum ambient temperature for paving is 50°F and rising, with no rain within 24 hours before or after.

Question 11

Is asphalt or concrete better for a Virginia driveway?

Accepted Answer

For most Virginia homeowners, asphalt is the better choice. It costs less upfront ($5–$9/sq ft vs. $8–$15 for concrete), flexes with freeze-thaw instead of cracking permanently, and every failure is repairable. Concrete has lower maintenance but higher upfront cost and any crack that forms is permanent. Over 25 years, asphalt wins on total cost for 80%+ of Virginia driveways.

Question 12

How long does a properly built Virginia asphalt driveway last?

Accepted Answer

A properly engineered Virginia asphalt driveway lasts 20–30 years with correct base prep and maintenance. Mountain-grade I-81 corridor driveways: 22–28 years. Virginia Beach coastal-spec driveways: 22–28 years. Standard inland driveways: 20–25 years. J. Worden & Sons warranties workmanship for 5 years and recommends sealcoating every 3 years (2.5 coastal) to reach the full lifespan.

Question 13

What is a 6-inch structural stone base and why does it matter?

Accepted Answer

A 6-inch structural stone base is 6 inches of compacted #57 crushed stone placed over woven geotextile on prepared subgrade. It distributes vehicle load, prevents the subgrade from pumping fines into the asphalt, resists freeze-thaw damage, and provides drainage. Cheap 3–4 inch bases are the #1 cause of premature driveway failure in Virginia. The 6-inch structural base is J. Worden & Sons' standard on every driveway and is non-negotiable on coastal and mountain properties.

Question 14

Does J. Worden & Sons offer free driveway estimates?

Accepted Answer

Yes. J. Worden & Sons provides free on-site estimates across its Virginia service footprint for a balanced mix of residential and commercial paving, sealcoating, asphalt repair, and maintenance work. The service area runs from Dinwiddie and Southside Virginia north to Fairfax and Northern Virginia, east to Virginia Beach and Hampton Roads, through Williamsburg and New Kent County new-construction growth areas, across rural residential corridors between the larger cities, and west through the I-81 corridor including Roanoke, Harrisonburg, and Winchester. Written line-item estimates include mix spec, base depth, repair scope, maintenance options, and binder grade. Call (804) 446-1296.

Asphalt Paving in McLean, VA — Premium Estate Driveways in Northern Virginia

High-Intent Paving Solutions For McLean Property Owners

Neighborhoods We Pave In McLean

Why McLean asphalt fails — and how we build to outlast it.

NOVA Freeze-Thaw + Premium Estate Base Requirements

Common Questions

Get a Precision Quote for Your McLean, VA Property